Aspire Flexus Pro Kit

How to turn on the Aspire Flexus Pro

To power up the Aspire Flexus Pro, press the power button quickly 5 times until ‘Aspire’ is displayed on the screen.

How to turn off the Aspire Flexus Pro

To power down the Aspire Flexus Pro, press the power button quickly 5 times until ‘Shut Down’ is displayed on the screen.

How to vape with the Aspire Flexus Pro

The device has three activation modes to choose from:

• Mode A: auto-draw – simply inhale on the mouthpiece to vape
• Mode B: button activated – press the button to inhale
• Mode AB: auto-draw and button activated – choose to either press the button or inhale

How to adjust wattage of the Aspire Flexus Pro

To adjust wattage, quickly press power button 3 times to enter wattage settings mode. Within 3 flashing seconds, adjust to your desired value by pressing the power button. The power value will stop flashing to indicate that the wattage is set.

How to charge the Aspire Flexus Pro

Insert the provided USB-C cable into the charging port towards the bottom of the device, then the 3 indicator lights will flash white 3 times. Once it is fully charged, the lights will flash white 10 times.

The below stages indicate the different charge levels:
Battery has less than 20% change: one bar
Battery has less than 40% charge: two bars
Battery has less than 60% charge: three bars
Battery has less than 80% charge: four bars
Battery has less than 100% charge: five bars

How to refill the Aspire Flexus Pro

In order to fill the Aspire Flexus Pro tank with e-liquid, first, pull to remove the pod from the device. Unscrew the top cap of your e-liquid bottle and insert the nozzle into the filling port. Screw back on the top cap and let the pod sit for 5-10 minutes to prime the coil. Then, reinsert the pod back into the device and vape.

How to replace the Aspire Flexus Pro Pod

When using fixed-coil pods, fill the pod with vape juice multiple times until the coil starts to deteriorate – you’ll notice a difference in vapour and flavour when this happens. Then remove the whole pod unit and replace it with a fresh one.

The Aspire Flexus Pro is compatible with, Aspire AF Flexus Coils, 1.0Ω fixed-coil pods and 50:50 e-liquids – all are available to buy from OK Vape.

Battery Safety Information

Please read the included instructions and follow the manufacturer’s recommended battery safety advice.

• Don’t leave batteries unattended.
• Don’t overcharge batteries.
• Do not charge from an integrated sofa USB port or any USB port that does not specify the power output.
• Ensure the output of the charging device is no more than 5V/1A.

OK Vape’s safety assured 5V/1A mains charging adapter can be purchased here.