Innokin Adept Zlide Kit
The Innokin Adept Zlide offers great versatility with the option of mouth-to-lung or direct-to-lung vaping, in a highly durable package.
The rubberised body offers superb grip and is both water, dust and shock resistant to an IP67 rating, designed for those working in demanding environments (and those of us who are just a bit clumsy).
Suitable for all users, the Adept offers a customisable vape without compromising on ease of use. The clever built in software optimises the wattage settings depending on which coil from the Innokin Zenith range is installed.
For a mouth-to-lung vape: Install the included 1.6 ohm Zenith coil and select from power settings between 11 & 14w.
For a direct-to-lung vape: Install the 0.48 ohm Plex3D Coil and select from power settings between 14w & 17w.
The built-in 3000mAh battery gives impressive vaping time between charges and offers 2amp quick charging when connected to a suitable mains adapter. What’s more, the handy LED display shows you how much charge is left in your battery.
Your kit will come complete with the highly rated Zlide tank which features a top fill system and fully adjustable airflow. You’ll also receive two coils, one at 0.48ohm and one at 1.6ohm. The 0.48ohm Plex3D coil offers a sub ohm or ‘direct-to-lung’ vape. We recommend that you use these coils with 14W to 17W settings. The 1.6 ohm Zenith coil is suitable for power settings between 11 to 14W.
Best E-Liquids to Use With The Innokin Adept Zlide Kit
We recommend using e-liquids with at least 50% PG with the 1.6 ohm Zenith coil. If using the 0.48 ohm Plex3D coil, we recommend using e-liquids with at least 50% VG.
You can find out more about PG & VG in this guide.
Includes 2 x OK E-liquids
Buy the Innokin Adept kit from OK Vape and choose two e-liquids from the OK Vape 50/50 or OK Sub Ohm Range. Choose your two free juices from our wide range of great-tasting flavours using the drop-down boxes above.
The Zlide tank included with this kit is compatible with Innokin Zenith coils.
Innokin Adept Zlide Instructions
Operating the device
To power the device on and off, press the fire button 3 times in quick succession. Hold down the fire button and inhale on the mouth piece to vape. Press the cycle button below the LED lights to to change the wattage on the device, the LEDs will indicate the selected output. Innokin recommends the following wattage settings for the Zenith coils:
0.8 ohm coil: 14-17W
1.6 ohm coil: 10-14W
Charging the Innokin Adept Zlide
To charge the device, gently open the rubber plug on the bottom of the device and insert the USB charging cable. The LED light will switch off when the device is fully charged.
Filling the Zlide tank
Filling the tank is simple with the sliding top tank mechanism. Simply remove the mouthpiece and slide open the top of the tank in the direction of the arrow. Once you’ve filled it with your favourite E-Liquid, slide the tank closed and insert the mouthpiece.
How to replace the coil
To change the coil, first unscrew the tank from the battery then unscrew the airflow ring from the bottom of the tank. Simply remove the old coil and replace it with a new one. You can then re-attach the airflow ring and screw the tank back onto the battery. Fill the tank with e-liquid and leave the new coil to prime for at least 5 minutes before vaping.
Battery Safety Information
Please read the included instructions fully and follow battery safety advice. Never leave charging batteries unattended and take care not to overcharge the battery. If you are charging this kit from a mains adapter, ensure that maximum power output no more than 2 amps and use a quality product that adheres to safety standards. Power off the device when not in use.
- Innokin Adept box mod
- Zlide tank
- 1 x PLEX3D 0.48 ohm coil (pre-installed)
- 1 x Zenith 1.6 ohm coil
- Spare tank glass & o-ring set
- Spare drip tip
- Micro-USB charging cable
- User Manual
- 2 x E-Liquids
- Over discharge
- Over voltage
- Short circuit protection
- Overheat protection
- High resistance protection
- Cut off protection.