Innokin Endura T18II Kit
The Innokin Endura T18II is the next generation of the best-selling Endura T18E. Innokin have added a higher capacity battery, three different wattage modes and adjustable airflow to allow you to customise your vape. However, the Endura T18II is still incredibly easy to use and an excellent all-in-one vape pen for beginners. This kit offers a mouth-to-lung (MTL) style vape which is often favoured by those new to vaping as it replicates how a smoker inhales a cigarette.
The design has been updated in the Endura T18II model, with smooth curves, graduated colourways and a nifty magnetic cap to protect the mouthpiece. This cap can be removed and attached to the bottom of the kit when in use. Innokin have also added three different wattage modes; Cool (10.5W), Medium (12W) and Warm (13.5W) and adjustable airflow. This keeps the kit simple to use but adds a level of customisation so you can tweak the settings for your perfect vape.
As with all Innokin products, you can expect excellent quality and safety features with the Endura T18II. It feels solid but smooth to hold and produces a subtle but satisfying vapour with great flavour. If you’re looking for your first e-cigarette or are moving on from a cigalike device, you can’t go far wrong with this kit.
Includes 2 x OK E-liquids
Buy the Innokin Endura T18II kit from OK Vape and receive two e-liquids from the OK Vape 50/50 range. Choose your two free juices from our wide range of great-tasting flavours using the drop-down boxes above.
Innokin Endura T18II Instructions
Operating the device
To switch the device on and off, click the fire button 3 times in quick succession. To adjust the wattage mode on the device, first make sure the device is powered off. Once the device is off, press and hold the button for two seconds, the device will then cycle through the wattage modes. The airflow can be adjusted by twisting the airflow ring.
Charging the Innokin Endura T18II
To charge the device, simply insert the USB cable into the charging port on the back of the device. The Innokin Endura T18II features battery indicator lights that will flash to show you the level of charge; all lights (high charge), two lights (medium charge), one light (low charge).
Filling the Innokin Endura T18II
To fill the tank on the device, unscrew the top cap and fill with your favourite E-Liquid, making sure to avoid getting liquid in the centre tube. Once you’ve filled the tank, screw the top cap back on.
When & How to Change Endura T18II Coils
You’ll need to change the coil in your Innokin Endura T18II when you notice a deterioration in flavour. The award-winning Prism T18E coils compatible with this kit are known for their longevity, so you’ll probably only need to change your coil every 1-3 weeks, depending on how heavily you vape.
To change the coil, unscrew the tank from the battery then unscrew the small metal section from the bottom of the tank. This will reveal the bottom of the coil. All you need to do then is to lift it out then replace it with a new coil. You can then re-attach the small metal section and screw the tank back onto the battery. Fill the tank with e-liquid and leave the new coil to prime for at least 5 minutes before vaping.
This kit is compatible with Innokin Prism T18E Coils.
You can find further instructions in the included Innokin Endura T18 2 manual or via the ‘Info & Guides’ tab above.
Battery Safety Information
Please read the included instructions fully and follow battery safety advice. Never leave charging batteries unattended and take care not to overcharge the battery. If you are charging this kit from a mains adapter, ensure that maximum power output is 1 amp and use a quality product that adheres to safety standards. Power off the device when not in use.
- Endura T18II battery (1300mAh)
- Prism T18II tank
- 2× 1.5 ohm coils (1 pre-installed)
- Magnetic cap
- Spare mouthpiece (drip tip)
- Spare o-ring set
- USB charging cable
- Instruction manual
- Warranty card, warning booklet & battery warning card