The Innokin Endura T22 Pro is the latest release in the popular Endura range. This sleek, feature packed device is an easy to use kit, perfect for beginners and those making the switch from cigarettes.
- Large 3000mAh battery with USB-C charging
- 4 wattage modes (9.5w, 11w, 12.5w, 13.5w)
- 2ml tank capacity
- Fixed airflow
- Sliding top filled tank
This kit comes with a large, built in 3000mAh hour battery, charged via the quick-charging USC-C port. The easy to use controls allow you to quickly cycle through the four different wattage modes; 9.5W, 11W, 12.5W and 13.5W.
Filling the T22 Pro tank is quick and easy, simply slide open the top cap, fill with your favourite OK 50/50 E-Liquid and slide the cap back shut. The tank features fixed airflow to deliver the perfect Mouth-To-lung vape.
- Innokin Endura T22 Pro
- Prism T18E Pro tank
- Spare drip tip
- 1.7ohm coil (installed)
- 1.5ohm coil
- USB Type C Cable
- User manual
Includes 2 FREE OK Vape E-liquids
Buy any kit from OK Vape and choose two e-liquids from the OK 50/50 e-liquid range. Choose your two free vape juices from our wide range of flavours and nicotine strengths using the drop-down boxes above.
FAQ'S & Instructions
The Innokin Endura T22 Pro is compatible with the Innokin Endura T18E coils, available in 1.5 ohm. This starter kit comes with two coils to get you started, one in 1.5 ohm and one 1.7 ohm. Replacement coils can be purchased here.
Innokin Endura T22 Pro Instructions
How to use the Innokin Endura T22 Pro
To turn the Innokin Endura T22 Pro on, first switch the power button at the bottom of the battery. Once the device is on, press the fire button 3 times in quick succession to to turn it on/off. The Endura T22 Pro features 4 different wattage outputs, indicated by the LED lights on the front of the device. To adjust the wattage on the device, press the wattage adjustor button below the LEDs.
How to charge the Innokin Endura T22 Pro
To charge the device, simply insert the charging cable into the charging port on the front of the battery. The light around the fire button will indicate the amount of charge remaining and will go out once fully charged.
How to fill the Innokin Endura T22 Pro tank
To fill the tank, simply slide the top cap in the direction of the arrow and fill with your favourite E-liquid. Once the tank is full, slide the top cap back shut.
How to replace the coil in your Innokin T22 Pro
To change the coil in the tank, first remove the tank from the battery and unscrew the base of the tank. The coil can then be pulled out and a new one can pushed in. Screw the base of the tank back in place and screw the tank back on the battery. Make sure to prime the new coil before first use.
Battery Safety Information
Please read the included instructions fully and follow battery safety advice. Never leave charging batteries unattended and take care not to overcharge the battery. If you are charging this kit from a mains adapter, ensure that maximum power output is 1 amp. You can purchase an OK Vape branded, safety assured 1 amp mains charging adapter here.
Power off the device when not in use.