Innokin Endura V Pro Pod Kit

Innokin Endura V Pro: How to Use

When you receive your Innokin Endura vape, carefully unbox the product and ensure any silicone plugs or covers are safely removed. Remove the pod and locate the filler plug – from here you can fill the pod with e-liquid and prime the coil by allowing it to sit for 5-10 minutes before use.

Before using for the first time, charge the device fully using the USB-C charging cable included in your kit— the screen will display the battery level during the charging process.

To operate the device, press the ‘fire’ button five times rapidly to turn the device on or off. To adjust the wattage, press the power button three times until the numbers start flashing and use the power button to adjust wattage in increments. Wait 5 seconds to exit wattage adjustment mode. We recommend starting at a lower wattage and adjusting upwards to find your preferred setting.

To start vaping, press and hold the fire button while inhaling through the pod’s mouthpiece. You are also able to initiate auto-draw activation simply by inhaling through the mouthpiece without pressing the fire button. You are also able to adjust the airflow by sliding the button on the side.

To prevent any accidental activation or issues in between use, slide the manual locking switch into the locked position.

Maintenance tips:

• Refilling the Pod: Monitor the e-liquid level through the transparent pod. Refill before it becomes too low to avoid dry hits.
• Replacing the Pod: Over time, the coil within the pod may degrade, leading to reduced flavour or vapor production. When this occurs, replace the pod with a new one.
• Cleaning: Periodically remove the pod and clean the contacts with a dry cloth to ensure a good connection.

Battery Safety Information

Please read the included instructions fully and follow battery safety advice.

Never leave charging batteries unattended and take care not to overcharge the battery. Important battery safety information: You can charge your battery from a laptop or computer USB port, or use a USB mains charging adapter. Read more about vape battery safety here.

Ensure the output of the charging device is no more than 1A/5V. Do not charge from an integrated sofa USB port or any USB port that does not specify the power output.
You can purchase an OK Vape branded, safety assured 5V/1A mains charging adapter here.