Aspire Flexus AIO Kit

How to Use the Aspire Flexus AIO Kit

Unpackage the Aspire Flexus AIO device and remove any plugs and covers. Remove the pod by gently pulling it away from the device and unscrew the top cap to locate the filling port. Insert the e-liquid nozzle and squeeze to fill the pod before screwing the cap back on. Allow the pod to sit for 5-10 minutes to prime the coil.

Re-attach the pod to the device and press the fire button 5 times within 2 seconds to power on the Aspire Flexus AIO. The light indicator will flash white 3 times to confirm the device is successfully switched on.

The device is both draw and button activated, so you can start vaping by inhaling on the mouthpiece of pressing the fire button.

How to adjust the Aspire Flexus AIO’s wattage

The Aspire Flexus AIO has three wattage settings: low, medium and high.

• Low Wattage Level: 1 white indicator light
• Mid Wattage Level: 2 white indicator lights
• High Wattage Level: 3 white indicator lights

To switch between the three wattage settings, press the fire/mode button once and the down indicator will light up for 3 seconds. Once selected, the indicators will turn off after 3 seconds and the wattage will be set.

How to charge the Aspire Flexus AIO

Insert the provided USB C cable into the charging port towards the bottom of the device, then the 3 indicator lights will flash white 3 times. Once it is fully charged, the lights will flash white 10 times.

The below light stages show the different charge levels:

• Battery has less than 30% charge: 1 white indicator light
• Battery has less than 60% charge: 2 white indicator lights
• Battery has more than 60% charge: 3 white indicator lights

When the cable is unplugged, the lights will flash 3 times again.

How to refill the Aspire Flexus AIO Pod

Refilling is effortless with the screw-to-open top-fill system, which is designed for easy use and leak prevention.

First, pull gently on the pod to remove it from the device. Next unscrew the top cap and insert the nozzle of your e-liquid bottle into the filling port. Finally screw back on the top cap and let the pod sit for 5-10 minutes to prime the coil. Then, reinsert the pod back into the device and vape.

How to change the coil in the Aspire Flexus AIO

An Aspire Flexus AF coil typically lasts between 1 and 3 weeks depending on vaping habits, e-liquid formulation and inhalation style. Start by removing all e-liquid from the pod: use a clean, dry paper towel to wipe out any residue. Now remove the pod from the device and turn it upside down. Pull out the used coil and clean out the pod if required before inserting a new coil in. Finally refill the pod with e-liquid and allow it to sit for 5-10 minutes to prime it before vaping as normal.

Compatible coils: 0.6Ω Aspire Flexus AF Coils and 1.0Ω Aspire Flexus AF Coils

Aspire Flexus AIO wattage

The Aspire Flexus AIO Vape Kit is highly intuitive and will automatically adjust wattage to suit the resistance of your selected coil:

• 6Ω Aspire Flexus AF Coil: 15-18W
• 0Ω Aspire Flexus AF Coil: 12-15W

Specifications

Dimensions: 114.2 (H) x 35 (W) x 26.6mm (D)
Output power: 12-18W
Battery type: built-in 2,000mAh
Charging: Type-C, 2A
Weight: 124.25g

Battery Safety Information

Please read the instruction manual carefully and follow the battery safety guidelines.

Vape batteries can be charged from a USB port or main charging adapter with a maximum output of 1A/5V. Do not charge from an integrated sofa USB port or any USB port that does not specify the power output. OK Vape branded, safety assured 5V/1A mains charging adapters are available here.

Never leave charging batteries unattended and take care not to overcharge the battery.